Sunday, December 31, 2017

Review of the Year of 2017



   Honestly, I have not really done a true review of the year, but I have been seeing a popular blog trend about this. In my case, this can be considered another addition to my normal blog entrees. I try my best to post about seven entrees in my blog for reader satisfaction per month. In this case, December has been fairly lacking in posts, despite actual lots of action. What is this action I speak of, you might say? In this case, Kalissa and I have played a lot of Star Wars: Imperial Assault. Whether in December this was a direct reaction to Star Wars: Legion or the new movie that had come out, we do not know. However, I do not have a current camera at this time other than Kalissa's iPhone. Normally, this would not be a problem until we recently discovered a free upload of the Star Wars: Imperial Assault phone application.  This makes photographing our Star Wars: Imperial Assault games impossible to photography while running the application. I only mentioned this, since we played quite a few games in December. This accounts for the lack of December posts.



    However, it has been a busy year overall for me. I have been keeping pretty busy with my own projects and commissions. Here is the rundown statistics of this year.


  1. Made 89 posts plus this one for this year.
  2. Played in 70 games that I am aware of. There could have been more!
  3. Made 37 gaming boards.
  4. Painted 860 figures.
  5. Painted 25 tanks and vehicles.
  6. Built and painted 3 buildings.
  7. Modified 11 feet of O scale railroad track.
  8. Went to 3 wargaming conventions.
  9. Helped my wife run two Bolt Action Tournaments.
  10. Ran 5 successful convention games.




Games played this year:


  1. Bolt Action: 23
  2. Muskets & Tomahawks: 4
  3. Wings of Glory WWI: 8
  4. Wings of Glory WWII: 12
  5.  Fire And Fury: 3
  6.  This Hallowed Ground: 3
  7.  En Garde: 1
  8.  Star Wars: Imperial Assault: 13
  9.  Iron Cross: 1
  10.  Zombicide: 2
  11.  Panzer Battles: 2
  12.  Sharp's Practice: 1
  13.  Johnny Rebel 3: 1
  14.  Battlegroup: 1
  15. Flames of War: 2
  16.  One Random Alien Game: 1

 
 
 

    I think that there would have been more games if it had not been for some of the personal events in my life. Plus, I have not really gone out of the way to game with new people. This is a habit I am hoping to break in the near future. It is not a New Year's Resolution, since those are usually broken by everyone. However, it just needs to happen for our area. Playing at home is nice, but it is not that effective at getting games. Plus, there is a lazy side to having a game room. It is easy to get sidetracked by other household chores and projects.
    However, I am looking forward to 2018. Kalissa and I have three conventions to look forward to. We have Bolt Action Tournaments to run. I have been gaining more interesting commission work. I have my own project that I am plowing through fairly on schedule. It will be an interesting year. Below are some highlights of 2017. Enjoy!

One of the Fire And Fury games. Though, it was disastrous on my part.

This was a commission I did for El Guettar.

This was another commission work I did. This was my customer's Civil War collection.

One of the many Wings of Glory games.

A more recent game of This Hallowed Ground.

The El Guettar board at Millennicon 

One of the Bolt Action Games we played.

Recent commission board I am finishing. This is one section of Waterloo.

Muskets & Tomahawks.

My convention game at Historicon.

A jungle board commission.

   
    

Sunday, December 10, 2017

AAR: This Hallowed Ground: Second Game Trial

   
     This was a test game Kalissa and I decided to play recently. We wanted to get a feel of some of modifications we made to the rules of "This Hallowed Ground" to see how they panned out. This were not too dramatic of changes. Mainly, we have to modify the worn and break points for certain units, because they were different sizes. I don't think people would be happy at a convention losing a unit based on morale with more than half the unit still on the table. We also had my starting Confederates with limited ammunition. The Union had some repeating rifles that were limited to three turns of shooting before they had to switch to half normal shooting. The reason was based on the Battle of Olustee we plan on running, two of the regiments ran out of ammunition during the battle for their Spencer rifles, so they were traded in mid-battle for unproven muskets in which only half ended up firing. It is not much of a wonder on why this battle was just as chaotic.
      In this game, Kalissa and I had the same number of units. The difference was that she had two cavalry units and I had a cavalry unit and an extra set of guns. We placed half of our forces on the table about a foot in. We rolled for initiative where I won out. Then, I just ending up getting great rolls from then on. Saves were near non-existent for the Union side. We both decided that maybe we need to lower the save to the 5+ just to give a little more hope, because Kalissa would roll 5's, but no 6's. Or at least, I felt like I burrowed all of the 6's, since I rolled a ton of them. I probably will not roll any more of them for the rest of this year. Anyway, here are some of the photos from our game.. Enjoy!


















Friday, December 8, 2017

Tree Life: The Making Southern Pines My Way.

   
  As I had mentioned in a previous blog post, I was to going to write up this tutorial about tall southern pine trees. Due to my iPhone being an asshole, some of the imagines are going to be sideways and upside down for this. So for those who were quick reading, you are probably laugh at yourself on the re-read of this thinking that you were drunk. However, this is really a combination of the iPhone acting up and my computer refusing to save my photo rotations. I will just count myself lucky that there were any saved images at all!
    Back to the task at hand! Things you will need for the basic pine woods are:

  1.    Tempered Hardboard or MDF.
  2.    An electric saw to cut the board in shapes. I used a cheap jig saw.
  3.    A small mini-hand saw for cutting dowels.
  4.    An electric drill with two sizes of drill bits. Sizes of bits depend on your needs.
  5.    A Phillip's Head Screw Driver.
  6.    1/2 wood screws.
  7.     Wooden dowels. Sizes vary on your needs.
  8.     Woodland Scenic Large trees or Sturdy branches that are similar.
  9.      Duct Tape or Masking Tape.
  10.     Super Glue. I use Loctite Control Gel.
  11.     Sea Foam of Sage Tree kits. I get them from Scenic Express.
  12.     Static Grass. I used 57.7 cm static grass. The color does not matter.
  13.     Two tones of  flat green spray paint  (hunter green and lighter green) and dark brown flat spray paint. 
  14.  A knife you can carve with.
     It seems like a lot for this project. It is! However, you can make a large amount of woods it you don't run out of everything like I did. I did not fully plan my venture. The good thing is the I have a better idea on what I need to complete my mission for the future.

    In starting the project, drew out shapes I what the bases in on the Tempered Hardboard I bought. I made it a point to not make the shapes too small or have too many dramatic curves, because I was going to cut this with a Jig-saw. There is no need to break blades or injure yourself doing this. Below was an example of a shape I cut out with it.

As you can see, I changed my mind on following the lines. 
      After cutting the shapes out, I decide to shave down the edges. I could do this with an electric sander, but the way I plan on basing it is not going to need to be perfect. I just carved the edges off with a knife. You will also note in the picture below, I used the other side with the rough texture. This can be used for basing with plastic or wood filler to built hills up if I should desire to. Below are the images of the steps!

I would suggest using a stronger knife if you decide to go with MDF instead of the Hardboard.


   Next, it is time for the dowels of the project. You want to size this up next to the miniatures to get an idea on how high you want them. Southern pines can be 40 to 80 feet in the air. The troops that I want to move through the woods, I want to move through without worrying about hands or figures hooking branches. I also have to consider the flags as well. You can make the dowels for preferred height. Also, keep in mind that you might trim off more branches. After this, I take the little hand saw of mine and cut the dowels into different various sizes around the height I want. This gives the various heights of trees like in nature. The saw you can get for $3.00 or a little more at a local hardware store.
"I think I will call him Mini-Saw!" Yes! Another sideways picture!

And this one is upside down! I used some smaller dowels, so you could get more than 5 pieces.
       Now that the dowel pieces are cut, I drill a hole on each one on the side I want for the wood screw to go into. I also use the same for the hardboard. Because I am using Woodland Scenic Trees, I used 1/2 wooden screws and I drilled the holes using 3/32 drill bit. Once, I drilled holes in everything, I mounted them securely together. It is after this, I switch to a 7/64 drill bit and drill holes on the top of the dowels. I move the drill in and out a lit for a tad extra room for the Woodland Scenic trees in stick into. 

Another upside down picture, but you get the idea.

The mounted dowels.

The hole added to the top.

And as you can see, they stick right in!
         After being satisfied with the results, I glue the trees in. There is no written rule that you have to do this for or the next step. If you travel on the go for wargaming, it might be beneficial to not do this for easy storage and break down. However, I am trying to make more permanent pieces. To get the trunks a more unified look, I decide to glue the Woodland Scenic trees down to the dowels. This can also make the tree more stable if you want more top heavy trees. I use tape to wrap over the joint seams. You can also go over a few times to build up a thicker ore tapered trunk. Now, I used duct tape, because I was lazy and I saw in the room. You might get more textured results with masking tape. But, since duct tape is rather smooth, I roughed it up with with the back end of scissors to get some texture. You could also, coat it with glue and add sand or saw dust for texture purposes. In either case, it is important to have sort of texture for when you later dry-brush this.

My duct tape trees!

This is after I roughed them up for talking back at me!
     When you got your trees ready, you can now mount the sea foam branches. I am not going to say that this is the easiest of tasks. I use Loctite Control Gel for a good reason. I can usually count to 30 and I can move on to the next branch. Sometimes the times can vary, because some the Sea Foam branches want to bow out. I just say to be creative with your colorful language while you are being creative. And really use colors when around children. Son of a Blue, Purple, Green!
     Really, it is not too bad. It just takes a little time and patience for the first branches. After you gain more confidence, it will start to come natural.
Some with the Sea Foam branches.

In this, you can see I trim off some of the lower branches. With some of these tree, less can be more.
    Now, I did not have the rest of the photos saved for the rest of this. The earlier tree making tutorial I made covers mush of the same things done for these trees. The difference is that I used static grass. Now, the color of the static grass is not that important after I add it to the trees, because I found I can just spray paint that. I go over it with a darker green as the base. The lighter green is from highlight that I spray lightly from afar. You can also use Superleaf or Noch Leaves to other types of trees. There nothing saying you cannot apply this method for other terrain ideas. Below where some recent results.




As you can see, this is a work in progress for a Cypress swamp.